Ventilation and air-handling systems in swimming pools operate under particularly demanding conditions. High temperatures, consistently high humidity, and pool air containing chloride can attack metal components and cause corrosion.
Appropriate corrosion protection is therefore one of the key quality features of a swimming pool HVAC unit. It protects housings, heat exchangers, condensate pans, and other components, thereby contributing significantly to the system’s long service life and high operational reliability.
The conditions in an indoor swimming pool are significantly different from those in, for example, an office building. Water evaporates constantly and is drawn in by the HVAC system along with the indoor air.
Added to this is the unique composition of the air in a swimming pool. VDI 2089 explicitly points out the elevated concentration of chloride ions and requires that the materials used be corrosion-resistant to the pool air.
When moisture, oxygen, and corrosive components come into contact with unprotected metal surfaces, corrosion can occur. Areas where condensation regularly accumulates are particularly critical.
Corrosion is not merely an aesthetic issue. Over time, it will damage structural elements, impair the function of components, and increase maintenance costs. Effective corrosion protection therefore plays a crucial role in extending the service life of the entire HVAC unit and is thus highly sustainable.
In HVAC units, corrosion can be prevented or at least significantly slowed in various ways. In practice, several measures are usually combined.
Coatings form a protective layer between the metal component and the corrosive environment. The quality and durability of the coating must be appropriate for the specific conditions it will be exposed to.
Another option is to select corrosion-resistant materials. Depending on the application, suitable aluminum or stainless steel versions can be used, for example.
The unit’s design also plays an important role. Joints, seams, cut edges, and areas prone to condensation should be designed so that moisture has as little surface area as possible to attack and condensate can drain away safely.
At HANSA, for example, the housings of the Pool Line units are manufactured from platal-coated sheet metal. The frame construction consists of anodized AlMg3 aluminum, which offers correspondingly high corrosion protection. The fins of the heat exchangers as well as the heat recovery system are coated, and the fans are designed with enhanced corrosion protection. Other mounting parts for the unit’s components are coated in Hansa’s in-house powder coating facility.
DIN EN ISO 12944 is frequently used to classify corrosion exposure. It distinguishes between various corrosivity categories, ranging from C1 (very low corrosivity) to C5 (very high corrosivity); in addition, there is the CX category for exceptionally high exposure levels.
In simple terms, the classification can be summarized as follows:
| Category | Corrosion Exposure | Typical Example |
|---|---|---|
| C1 | Very low | dry indoor environments |
| C2 | low | Indoor spaces with occasional moisture |
| C3 | Moderate | Production areas with higher humidity |
| C4 | High | including swimming pools, among others |
| C5 | Very high | Very aggressive and humid environments |
| CX | Extreme | exceptionally aggressive environments |
In addition to the corrosivity category, the desired service life can be taken into account. The abbreviation “H” indicates a long service life. Important: The service life is a technical design parameter and should not be equated with a warranty or guarantee period.
The Pool Line units from HANSA Klimasysteme were developed specifically for dehumidifying and climate-controlling swimming pools. Accordingly, corrosion protection is a top priority for these units.
In the swimming pool version, all internal components are powder-coated to protect against chlorine-containing air. According to the manufacturer, there are also no galvanized materials in the airflow. Joints and seams inside the unit are additionally sealed.
For the built-in components manufactured by HANSA—such as parts of heating and cooling coils, silencers, and condensate pans—HANSA specifies a coating with a corrosion protection class up to C5-H. Uncoated parts are made of non-rusting materials (anodized aluminum, stainless steel).
The units are specifically designed, both in terms of construction and the materials used, to withstand the humid and chloride-laden atmosphere of a swimming pool. HANSA accordingly highlights the high level of corrosion protection provided by all materials and components used as a key feature of its swimming pool equipment.
When selecting a swimming pool HVAC unit, you should consider more than just the purchase price and energy efficiency. The system is exposed to a harsh environment for many years. Corrosion damage can lead to repairs, increased maintenance costs, or the premature replacement of individual components.
High-quality corrosion protection therefore ensures:
a long service life – high operational reliability – reduced maintenance requirements – long-term functionality of the components.
Especially for swimming pool HVAC units, corrosion protection is therefore not an optional feature, but an essential component of a design that ensures long-term reliability.
In short: The better the housing, built-in parts, and components are protected against the humid, chloride-laden pool air, the better the conditions for long-lasting and reliable operation of the HVAC system.